You can make a wall Christmas tree from one strand of string lights by zigzagging it in rows inside a triangle outline. For a tree 6 feet tall and 4 feet wide at the base, you need roughly 19 feet of lit wire with rows 12 inches apart, about 24 feet with rows 9 inches apart, and about 32 feet with rows 6 inches apart.
The math
The tree is an isosceles triangle with height H and base B. Rows are spaced s apart. A row at distance y from the top has width B × y / H. Add all the row widths, then add the slanted side segments that link one row to the next.
For H = 6 ft and B = 4 ft:
| Row spacing | Rows | Row wire | Link wire | Total lit wire |
|---|---|---|---|---|
| 12 in | 6 | 14.0 ft | 5.3 ft | 19.3 ft |
| 9 in | 8 | 18.0 ft | 5.5 ft | 23.5 ft |
| 6 in | 12 | 26.0 ft | 5.8 ft | 31.8 ft |
Add 1 to 2 feet for slack, and remember the lead wire to the power source is extra. These are geometric estimates for an example tree, not customer results.
Pick the lights
- For a plug-in or USB tree with 6-inch rows, the 200 LED copper wire lights (66 ft variant) have enough length to cover a larger wall tree with denser rows. The 33 ft variant works for a smaller or 12-inch row tree.
- Use 100 LED 33 ft copper wire lights for a table-top or door-sized tree.
Check the variant selected on the product page; length and color differ by variant.
Build it
- Mark the shape. Use painter's tape or a pencil dot at the apex and two base corners; measure with a tape measure.
- Place hooks. Use removable adhesive hooks or clips along both slanted edges at each row height. Check the hook weight rating and your wall finish.
- Start at the top, with the plug end nearest the outlet.
- Zigzag down. Wrap the wire around each hook on the left side, run it straight across to the right, and continue.
- Add the trunk and topper. A small star or a short strand makes a trunk.
- Add ornaments by clipping paper stars or lightweight ornaments to the wire.
Wall and power safety
- Keep the plug and transformer off the floor and away from water.
- Use removable products on rental walls and test a spot first.
- Don't overload outlets. For multiple strands, see how many string lights can you connect.
Other ways to use the same lights
Once the season is over, uncoil the strand carefully and reuse it for a headboard, a window or a patio. For a real tree, our Christmas tree lighting guide has the standard approach.
