How to Hang String Lights on a Brick Wall Without Drilling
Most of our hanging guides assume you're attaching to wood trim, vinyl siding, or a window frame — surfaces where a removable adhesive hook sticks reliably. Brick is a different problem. The surface is textured and porous, and the mortar lines between bricks aren't flat either, so standard adhesive hooks often lose their grip faster than they do on smooth paint or vinyl. Here's what actually works.
Why brick is harder than other surfaces
Adhesive hooks rely on full, flat contact with a smooth surface to hold their rated weight. Brick's rough texture reduces that contact area, and if you land on a mortar joint instead of the brick face, the grip is worse still. This isn't specific to any one light product — it's true of any lightweight item you're trying to hang on brick without drilling.
Three no-drill options for brick
- Brick clips (mortar-joint clips): These are small metal or plastic clips sold separately (not something we currently stock) that hook over the lip of a single brick or grip the mortar joint without adhesive or drilling. They're the standard no-drill solution purpose-built for brick, and they're what most outdoor-lighting installers reach for first.
- Masonry-rated adhesive strips: Some adhesive mounting strips are specifically rated for rough or textured surfaces, unlike standard smooth-surface hooks. Check the packaging for a textured-surface or masonry rating before relying on one for an outdoor run — a strip rated only for smooth surfaces is the most common reason adhesive mounting fails on brick.
- A tension rod or cable run just off the wall: Instead of attaching directly to the brick at all, run a thin cable or rope between two anchor points (a post, a downspout bracket, a nearby fence) that sits just in front of the brick face, then clip your lights to that cable. This sidesteps the brick-adhesion problem entirely.
Putting your lights up once you have a mounting method
- Decide your layout first — a straight line along the top of the wall, or a draped swag between a few anchor points — using the same layout thinking as our string light coverage guide.
- Space brick clips or masonry strips every 12-18 inches along your chosen line, same spacing as our other hanging guides recommend for smooth surfaces.
- Rest the main wire (for curtain lights) or the strand (for string lights) in the clips, letting it hang with a little slack rather than pulled taut.
- Keep the plug and any controller off the ground and under cover if the wall is exposed to weather — our curtain lights and most of our string lights are IP44-rated on the transformer/controller, which covers normal outdoor exposure but not submersion.
Which of our lights work well on a brick feature wall
A brick wall is a strong candidate for either a straight string light run (our 100 LED Star String Lights, extendable per its own listing) or a full curtain-light panel if you want a denser, flatter wall of light rather than a single line — our 300 LED Window Curtain String Light panel measures 6.6 ft wide.
FAQ
Will any adhesive hook eventually work on brick if I press hard enough?
Not reliably. The problem is surface texture and contact area, not how hard the hook is pressed on. A hook rated for smooth surfaces will usually still fail on brick over time, especially outdoors where temperature swings loosen adhesive further.
Does Twinkle Star sell brick clips?
No — our current catalog doesn't include brick-specific mounting hardware. Brick clips and masonry-rated adhesive strips are sold separately by other hardware brands; we're naming the category here so you know what to look for, not recommending a specific brand.
Shop: String Lights & Fairy Lights collection · 100 LED Star String Lights · 300 LED Window Curtain String Light