Put the solar panel in the spot that gets the most direct sun, and run the light wire from there to the tree or fence. The cord is only 6.5 ft, so you plan around the panel first and the lights second.
What the set includes
The Outdoor Solar String Lights have 120 LEDs on a 39.4 ft string with a 6.5 ft cord, for a total of 45.9 ft. According to the listing, each set has 8 lighting modes with memory, charges in 8 to 12 hours of direct sun and then runs for 10 to 14 hours, and comes on at dusk and off at dawn. Each set includes a rechargeable NiMH AA battery (800 mAh).
Where to put the panel
- In the continental US, face it south and tilt it slightly upward if the mount allows.
- Look at the spot from 10 a.m. to 3 p.m. If a tree, eave or fence shades it for part of that time, move it.
- Do not place the panel under the tree you are lighting. A leafless branch in November lets sun through, but it will not once the leaves return.
Layout on a tree
- Choose the panel location first, then measure the distance to the nearest branch you want to light. That distance must be 6.5 ft or less, or you need to move the panel on a stake.
- Wrap the string from the trunk outward, loosely, so wind does not pull it tight.
- Count the usable length. A 39.4 ft string covers a small tree or the lower branches of a medium one.
Layout on a fence
Run the string along the top rail, panel at one end. If the fence runs east to west, the panel on a south-facing post catches the most sun.
Before you hang anything
- Switch the unit on. The listing notes an ON/OFF switch on the back of the panel that must be turned on before charging.
- Charge it fully in the sun for a day before you judge the brightness.
- Keep the panel clean. A dusty or leafy panel charges less.
Short winter days
The run times in the listing assume good weather and 8 to 12 hours of direct sun. In late fall and winter the days are shorter and the sun is lower, so expect the lights to run for fewer hours. Cloudy stretches will do the same.
