Measure from the outlet to the top corner of your lights before you hang anything. The 600 LED curtain lights listing gives an 8.9ft lead wire, and that distance decides how much hiding is even possible.

Check the reach
Example, using assumed numbers: an outlet 1ft above the floor, a window top at 7ft, and the outlet 3ft to the side of the window corner. The cord must go up 6ft and across 3ft, which is 9ft. That is more than 8.9ft, so the cord will not reach without a stretch. Measure your own room: vertical rise + horizontal run, then add 6 inches for slack.
Ways to route it
- Hang the lights at the end nearest the outlet. Choose which side the plug lead exits before you mount.
- Run it along the wall trim or baseboard with small removable cord clips, then drop behind a sofa or plant.
- Tuck it into a drapery fold. If a curtain panel hangs beside the lights, the cord can disappear behind it.
- Use a flat extension cord in a color matching the wall when the outlet is too far. Keep it out of walkways.
Cautions
- Do not staple or nail through a cord.
- Do not run it under a rug where it can be stepped on or overheat.
- Keep the controller within reach. It holds the 8 modes, and the plug-in transformer should not be buried behind heavy furniture.
The listing describes the transformer and controller as IP44. If you use the set outdoors, it recommends a waterproof receptacle cover. For hanging methods, see how to hang curtain lights with no nails and how many curtain light sets per outlet.
