Choose the hiding place for the battery box first, then start the strand there. The short wire between the box and the first bulb is what limits you, so plan the box location before you place any lights.

This applies to AA battery sets such as the 50 LED 16ft mini lights and the 33ft blue fairy lights. Per their listings, each strand runs on 3 AA batteries (not included) and has an IP44 battery box. The blue set lists a 1.6ft lead wire. The mini light listing does not publish a lead length, so check your strand before you commit to a spot.
Where the box can go
| Project | Good hiding spot | Watch out for |
|---|---|---|
| Christmas tree | Wedged against the trunk, or under the skirt if you start at the bottom branch | Keep the box reachable for battery changes. |
| Wreath | Zip-tied or wired to the back frame | Face the compartment door toward you. |
| Centerpiece or jar | Behind a candle, under a runner, or inside a box wrapped like a gift | Leave room for the switch. |
| Garland or mantel | Behind a stocking or a figurine | The box is heavier than the wire; anchor it. |
Three tips
- Start at the box. Run the lead wire toward the first branch, then wrap outward. If the wire is too short, move the box, do not stretch the wire.
- Use a green zip tie or floral wire on a tree so the box does not shift when you rearrange branches.
- Do not bury it. You need the on/off or mode button, and you will change batteries mid-season. A buried box is a chore.
If it is outdoors
IP44 means the box tolerates splashes, not submersion. Keep the lid facing down or sideways so rain does not collect on it, and keep it off the ground.
For wreath wiring see how to wrap a wreath with battery mini lights. For tree wrapping, string lights on a Christmas tree step by step.
