Before buying curtain lights for multiple windows, measure what you're actually covering — the 300 LED set and the 600 LED set are sized very differently, and matching the set to the window avoids both gaps and wasted lights bunched up at the edges.
The actual dimensions
- 300 LED set: 6.6 ft wide x 9.8 ft long (width x length, measured across the draping curtain of lights).
- 600 LED set: 15.7 ft wide x 9.8 ft long — more than double the width of the 300 LED set, same drop length.
Sizing by window, not by room
Because both sets share the same 9.8 ft drop length, the decision usually comes down to width, not height — unless your window is unusually tall and needs a different approach entirely (these sets are not height-extendable). Use the window's actual frame width, not the room's width, as your reference measurement:
- Single standard window (roughly 3–6 ft wide): one 300 LED set (6.6 ft wide) comfortably covers most single windows with a bit of overlap at the edges for a fuller look.
- Wide window or sliding glass door (roughly 7–15 ft wide): one 600 LED set (15.7 ft wide) covers this range in a single piece without needing to join two sets.
- Multiple windows in a row, or a very wide wall: rather than stretching one set thin to cover more width than it's rated for, use multiple sets — for example, two 300 LED sets side by side across two similarly sized windows, each with its own transformer and outlet.
Why "just stretch it further" doesn't work
The LED spacing on these curtain lights is fixed at the factory — a 300 LED set has a set number of vertical strands evenly spaced across its 6.6 ft width. Pulling it wider than its rated width to cover more window doesn't add more coverage; it just spreads the existing strands farther apart, leaving visible gaps rather than the dense curtain look these lights are designed for.
Covering several windows in one room
If you're decorating more than one window in the same room, it's usually simpler and more consistent to buy one correctly sized set per window rather than one oversized set stretched across all of them. That also means each window's transformer plugs in near that window, rather than running one long lead wire across a wall — see our guide on how many curtain light transformers you can safely run on one outlet if you're combining several sets in the same room.
Quick measuring checklist
- Measure the window's outer frame width, not the glass alone, if you plan to mount at the frame.
- Add a few inches of overlap allowance if you want a fuller, denser look rather than an exact edge-to-edge fit.
- Confirm your mounting surface and hardware before buying — see our guide on hanging curtain lights on a window, wall, or porch.
